Fleet Titan
← Back to the blog

Fleet Maintenance Tracking: A Practical Guide for UK Van Fleets

Fleet manager checking a van service record

Fleet maintenance tracking means keeping one reliable record of every van’s checks, defects, services, MOTs and repair costs, so that nothing falls due unnoticed and you can prove what was done. For a UK van fleet, the core is simple: record daily walkaround checks, act on defects at once, service to the manufacturer’s schedule, and keep the paperwork for at least 15 months. This guide shows what to record, how to plan it and how to make it easy enough that drivers actually do it.

Fleet-titan
Keep Van Checks and Defects in View
Fleet Titan brings daily checks, defect management and compliance reminders together to help managers keep van fleets legal and safe.
Visit Fleet Titan

TL;DR

  • Track four things for every van: daily checks and defects, servicing and repairs, MOT, insurance and tax dates, and the cost of each.
  • Keep defect, inspection and repair records for at least 15 months. Electronic records are acceptable if the essential information can be produced for examination.
  • Plan servicing per vehicle, not with one interval for the whole fleet, and follow manufacturer recommendations.
  • Good records also help your fuel bill: tyre pressures, idling and speed all show up in the data.
  • Choose a system drivers will use on a phone, with an audit trail and reminders you cannot easily miss.

Table of Contents

What fleet maintenance tracking involves

Tracking is not a spreadsheet of service dates. It is the full history of each vehicle, built up so that a manager can answer three questions at any moment: is this van safe and legal to drive today, what is coming due, and what has it cost us?

A UK business guide to fleet maintenance planning suggests a practical plan should hold vehicle details (registration, make, model, fuel type, mileage and the date the vehicle entered the fleet), service schedules with manufacturer requirements and mileage intervals, MOT and inspection dates, driver check procedures, repair records, who is responsible for maintenance, vehicle availability and replacement considerations.

In practice that breaks into a handful of record types:

Record What to capture Why it matters
Vehicle profile Registration, make, model, fuel type, mileage, date joined fleet One source of truth for every van
Daily checks Who checked, when, what was checked, pass or fail Proof that checks happen and a trail of early warnings
Defects Description, who reported it, when, what was done, who signed it off Shows faults were fixed before the van went back out
Servicing and repairs Date, mileage, work done, garage, cost Builds the history behind your planning
MOT, insurance, tax Expiry dates with reminders Avoids a van being driven without cover or a valid MOT
Costs and downtime Spend by van and category, days off the road Shows where money and availability are being lost

If you run tools and stock in the vans as well, track those against the same vehicle. A van that is legal but missing the equipment for tomorrow’s job is still a lost day.

The rules give you a floor to build on. Vans with a design gross weight of up to 3,500kg need an MOT every year once they reach three years old, and GOV.UK’s guidance on running a fleet of vans says operators should keep records of defects, maintenance and repairs for at least 15 months as part of an effective maintenance system. The same page advises servicing to at least the minimum standard in the manufacturer’s guidelines and making sure vans are always insured, taxed and MOT’d.

For operators in scope of the wider roadworthiness guidance, the GOV.UK Guide to maintaining roadworthiness states that safety inspection records must be kept for at least 15 months, and that electronic records are acceptable if they contain the essential information and can be made available for examination. It also says drivers’ defect reports, used to record faults and rectification work, must be kept for the same period.

Two practical points follow:

  1. A 15-month retention rule is a rolling one. Records need to stay retrievable by van and by date, not buried in a driver’s glovebox or a messaging thread.
  2. An MOT is not a maintenance plan. The HSE’s guidance on maintaining vehicles points out that an MOT certificate only covers basic defects and does not guarantee a vehicle is safe. Planned and preventive maintenance in line with manufacturers’ recommendations is what fills the gap.

Daily checks and defect management

The daily walkaround is the cheapest maintenance tool you have. GOV.UK’s roadworthiness guide says a driver or responsible person must carry out a meaningful daily walkaround check, preferably immediately before the vehicle is used, and that any defect making the vehicle unroadworthy must be rectified before use. The HSE adds that employers should make sure workers carry out and record daily checks.

What separates a fleet that does this well from one that does not is what happens after the check:

  • A clear route for reporting. The HSE expects employers to have procedures for reporting defects, to get defects remedied promptly, and to have a clear policy that unsafe vehicles are not driven.
  • A named owner for every defect. Someone is responsible, a date is set, and the fix is signed off.
  • No silent passes. If a check can be ticked in two seconds without looking, it will be. Short, specific prompts (tyres, lights, mirrors, fluid levels, load security) work better than a long generic list.
  • Photos where useful. A picture of a cracked light or worn tyre removes argument about severity.

There is a money case too. GOV.UK notes that safety inspections with prompt remedial action are cost effective, because early indication of wear, damage or maladjustment may prevent sudden component failure and unscheduled downtime. A small defect logged on Monday is a booked garage visit. The same defect ignored becomes a roadside recovery.

Planning maintenance around each van

Planning is where tracking pays back. The aim is to service vans when it suits the diary, not when they fail.

Set intervals per vehicle

Avoid one generic interval for every vehicle. The Commercial Vehicle Contracts guide makes the point that schedules should reflect each model’s requirements and the manufacturer’s recommendations, and that a van with high annual mileage or regular heavy loads faces different demands from a company car used on shorter journeys. GOV.UK’s van guidance goes a step further for hard-working vans: have qualified people check safety-critical components such as brakes frequently.

Work from three triggers

Most vans fall due on whichever comes first of:

  1. Mileage, from the manufacturer’s service schedule.
  2. Time, such as an annual service or MOT date.
  3. Condition, from defects reported in daily checks, such as a brake warning or uneven tyre wear.

Your tracking system should show all three in one view per van, so a service due in 600 miles is visible before the van is booked on a job 400 miles away.

Plan for availability

Book work around the job schedule. For a trade or construction business, that means avoiding the week of a big install and keeping a view of which vans are free. Multi-branch fleets gain most here: seeing every branch’s upcoming MOTs and services in one place lets you move work between depots rather than discovering a lapse after the fact.

Keep a replacement view

Repair history is the evidence for when a van stops being worth keeping. If one van generates repeated repairs and downtime, the records make the replacement decision a matter of figures rather than instinct.

Tracking fleet maintenance costs

You cannot reduce what you do not measure. The same planning guide lists the useful figures to monitor: servicing expenditure, repair costs by frequency, type and value, tyre expenditure, MOT and inspection costs, downtime, and the administration time spent on maintenance.

A simple monthly view by van and by category answers most questions:

  • Which vans cost the most per mile or per month, and why?
  • Are repairs mostly planned or unplanned?
  • Is tyre spend rising on particular vans or particular drivers?
  • How many working days were lost to vehicle problems?
  • How many hours does your office spend chasing paperwork?

That last one is often overlooked. If someone spends half a day each week finding service dates and chasing driver sheets, that is a maintenance cost even though no garage invoices it.

Ways to bring costs down without cutting corners

  • Catch faults early. As above, GOV.UK ties prompt inspection and remedial action to avoiding sudden failure and unscheduled downtime.
  • Service on schedule. Predictable, planned spend is easier to budget than emergency repairs.
  • Remove admin. Automatic reminders for MOT, insurance and tax replace diary notes and memory.
  • Spot patterns. Repeated defects on one model or from one driver point to a training or supplier issue worth fixing.

None of this involves skipping work. The savings come from fewer surprises, not fewer checks.

Fuel efficiency is a maintenance topic too

Fuel efficiency is a maintenance topic too

Fuel is usually the largest running cost, and it responds to maintenance. The FORS Fuel Management Guide reports that for every 10 per cent decrease in tyre pressure, fuel consumption rises by two per cent, and that energy-saving low rolling resistance tyres can reduce an operator’s fuel bill by as much as 13 per cent. Its speed advice is aimed at HGVs (a 20 per cent fuel saving from dropping from 56 mph to 50 mph), but the principle that speed and idling drive consumption applies to vans as well.

This gives you cheap additions to a daily check and a monthly review:

  • Record tyre pressures or a pass or fail on inflation in the walkaround.
  • Log tyre replacements by van so you can see spend and wear together.
  • Watch for vans whose consumption drifts upward, which can signal a mechanical fault.

On the data side, BP’s fleet insights cites an RAC estimate that fleets could cut fuel costs by up to 15% using telematics data to tackle excessive idling, harsh acceleration and braking, and inefficient route planning. The same piece makes a point worth keeping: the value lies in spotting patterns, understanding what drives them and acting, and driver data is best used to find where drivers could use support rather than simply to keep tabs on them.

What to look for in tracking software

Spreadsheets work for three vans and break at ten. The tipping point is usually when reminders get missed or nobody can say which vans have had their checks this week.

GOV.UK’s roadworthiness guide actually lists the features of a good computerised maintenance system, which makes a useful checklist:

  • Instant access to downloaded inspection results and reports, with hard copies available on request.
  • Tamper-proof records, with clear identification of what was checked and by whom.
  • A clear end-to-end audit trail and a data file covering all maintenance records for the fleet.
  • Fully electronic inspection records and collaborative digital planners.
  • A driver walkaround check and defect reporting application.
  • A compliance dashboard.
  • GDPR compliance, plus data back-up and disaster recovery.

Add the practical tests a fleet manager applies:

  1. Will drivers use it? If the check takes longer than a minute on a phone, completion will drop.
  2. Does it connect checks to action? A failed check should create a defect with an owner, not just a red mark.
  3. Are reminders automatic? MOT, insurance and tax dates should prompt you without anyone remembering.
  4. Does it cover your whole operation? Tools, jobs and customer work sit alongside vehicle compliance for trades and construction firms.
  5. Can you see every branch? Multi-site operators need one overview, with each company’s records kept separate and secure.
  6. Does pricing scale with the fleet? Pay for the vans you have, not a bundle designed for someone else.

Our perspective

Most van fleets we speak to do not have a maintenance problem so much as a visibility problem. The checks get done, the garage gets booked, but the information lives in six places: a driver’s notebook, a text message, an email from the garage, a calendar entry for the MOT.

We built Fleet Titan so that daily checks, defects, MOT, insurance and tax reminders, tools, jobs and customer paperwork sit on one dashboard that managers and drivers can both read. Our aim is that a manager can open one screen and see which vans are safe to send out, what falls due next, and what needs attention today.

We also believe maintenance records should not stop at the vehicle. For a trade or construction business, a van is a workplace: the tools inside it and the job it is heading to matter as much as the tyres. That is why we keep vehicles, tools and jobs together, and why we offer onsite vehicle and tool audits for firms that want a first clear picture of where their fleet stands.

Start with the daily check and a single defect log. Get those right and everything else, from planning to costs, has something solid to build on.

Curtis

Getting started with Fleet Titan

Fleet Titan is a fleet management platform for businesses with van fleets, covering daily checks, defect management, MOT, insurance and tax reminders, tool and stock tracking, job assignment, customer quotes and invoicing, and reporting. Plans are billed monthly based on fleet size: Essential is £19.99 per month, Connect £59.99, Control £89.99 and Advanced £199.99, with Advanced+ also available. See the plans and pricing to find the fit for your fleet. Early sign-ups receive extended free access, so check the site for the current terms.

Fleet-titan

If you would rather start with a snapshot of where your vans stand today, we also offer onsite inspections on the Fleet Titan homepage: £15.00 one-off per van for a vehicle inspection, £15.00 per van for a tool inspection, or £25.00 per van for both on one van.

FAQ

How long must fleet maintenance records be kept in the UK?

GOV.UK says safety inspection records, and drivers’ defect reports recording faults and rectification work, must be kept for at least 15 months. Its van fleet guidance gives the same period for records of defects, maintenance and repairs. Electronic records are acceptable if the essential information can be produced for examination.

What should a daily vehicle check cover?

It should be a meaningful walkaround, ideally done just before the van is used, covering items such as tyres, lights, mirrors, fluid levels and load security. Record who did it and when, and report any defect straight away. Any defect making the van unroadworthy must be fixed before it is driven.

How often should vans be serviced?

Follow the manufacturer’s service schedule for each model rather than a single fleet-wide interval. Vans with high mileage or heavy loads may need more frequent attention, particularly to safety-critical parts such as brakes. Vans up to 3,500kg also need an annual MOT once they are three years old.

Is fleet maintenance tracking software worth it for a small fleet?

If missed reminders, paper check sheets or scattered records are costing you time, yes. A system gives you automatic MOT, insurance and tax reminders, a searchable defect history and an audit trail. Our plans start at £19.99 per month, scaled to fleet size.

How can I reduce fleet running costs?

Start with prevention: daily checks, prompt defect repairs and servicing on schedule. Then watch tyre pressures, idling and speed, which all affect fuel use. Track spend by van so you can see which vehicles and habits cost most.

Sources

Written with BabyLoveGrowth to rank on Google